[Linux-ham] GPS/APRS unit update

Tanner Lovelace clubjuggler at gmail.com
Fri May 12 15:58:11 EDT 2006


Remember, btw, that I believe these are only the boards for
the connector to the GPSr board.  That is, it's just the board
at the top of this page:


For the rest of it, they didn't use PC boards.  The only other thing
that might have needed it was the 7805 power regulator and if you
look at this page, top left


All they did was just solder the connections directly to the 7805
(including the needed capacitors).

Still, the interface to the GPSr board is the most problematic part
of this entire thing, so getting that PC board and the 20 pin header
from mouser will simplify things greatly.

Thanks for spearheading this and finding this group.


On 5/12/06, Rob Rousseau <ki4bke at nc.rr.com> wrote:
> They will be $3.
> Rob Rousseau wrote:
> > Well we are about to get some PC boards for the GPS unit from Dave
> > Davis.   If anyone on here would like a PC board, just let me know and
> > I'll tell him.  I'm planning to give him $2 for his materials and s&h
> > for them.  Just let me know how may you want by Monday.  So far Tanner
> > is getting 2 and I'm getting 1.
> > Thanks!
> > -Rob
> _______________________________________________
> Linux-ham mailing list
> Linux-ham at trilug.org
> http://www.trilug.org/mailman/listinfo/linux-ham

Tanner Lovelace
clubjuggler at gmail dot com
(fieldless) In fess two roundels in pale, a billet fesswise and an
increscent, all sable.

More information about the Linux-ham mailing list