[Linux-ham] serial port on pci-e adapter not working / on-board neither

folkert folkert at vanheusden.com
Fri Jul 13 02:56:17 EDT 2012


Hi,

I have a C7 system with an on-board serial port. This port is detected
and I can 'cat' it (no 'safety check engaged').
It seems this port is not usuable for a baycom modem though. I verified
that the baycom modem works fine on an other system. On this system it
doesn't work; it doesn't "see" that the system sends data.

So for that I added a PCI-E serial port adapter:
02:00.0 Serial controller: NetMos Technology Device 9904 (prog-if 02
[16550])
        Subsystem: Device a000:1000
        Flags: fast devsel, IRQ 24
        I/O ports at d480 [size=8]
        Memory at fe9f9000 (32-bit, non-prefetchable) [size=4K]
        Memory at fe9f8000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
        Capabilities: [78] Power Management version 3
        Capabilities: [80] Express Legacy Endpoint, MSI 00

02:00.1 Serial controller: NetMos Technology Device 9904 (prog-if 02
[16550])
        Subsystem: Device a000:1000
        Flags: fast devsel, IRQ 25
        I/O ports at d800 [size=8]
        Memory at fe9fb000 (32-bit, non-prefetchable) [size=4K]
        Memory at fe9fa000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
        Capabilities: [78] Power Management version 3
        Capabilities: [80] Express Legacy Endpoint, MSI 00

02:00.2 Serial controller: NetMos Technology Device 9904 (prog-if 02
[16550])
        Subsystem: Device a000:1000
        Flags: fast devsel, IRQ 26
        I/O ports at d880 [size=8]
        Memory at fe9fd000 (32-bit, non-prefetchable) [size=4K]
        Memory at fe9fc000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
        Capabilities: [78] Power Management version 3
        Capabilities: [80] Express Legacy Endpoint, MSI 00

02:00.3 Serial controller: NetMos Technology Device 9904 (prog-if 02
[16550])
        Subsystem: Device a000:1000
        Flags: fast devsel, IRQ 27
        I/O ports at dc00 [size=8]
        Memory at fe9ff000 (32-bit, non-prefetchable) [size=4K]
        Memory at fe9fe000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
        Capabilities: [78] Power Management version 3
        Capabilities: [80] Express Legacy Endpoint, MSI 00

Problem now is: it is detected but no serial ports are "created".

[    1.165293] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.165430] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.165930] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.166139] serial 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 24
[    1.166174] serial 0000:02:00.1: PCI->APIC IRQ transform: INT B -> IRQ 25
[    1.166206] serial 0000:02:00.2: PCI->APIC IRQ transform: INT C -> IRQ 26
[    1.166238] serial 0000:02:00.3: PCI->APIC IRQ transform: INT D -> IRQ 27

This is with 'acpi=off'. If I do not add that, then I get a message that
'INT A-D is disabled'.

Anyone got a suggestion what to do?


Folkert van Heusden

-- 
MultiTail è uno flexible tool per seguire di logfiles e effettuazione
di commissioni. Feltrare, provedere da colore, merge, 'diff-view',
etc. http://www.vanheusden.com/multitail/
----------------------------------------------------------------------
Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com


More information about the Linux-ham mailing list