[TriLUG] getting RH 7.1 to see new nics
jonc at nc.rr.com
Tue Apr 20 12:26:34 EDT 2004
On Tue, 2004-04-20 at 12:03, Dan wrote:
> I have a Proliant ML370 server that has an on-board NIC... we needed more
> interfaces so we have added 3 Netgear GA302T adapters to the system but the
> kernel doesn't see the new cards... it still only sees eth0 at boot. The
> cards have a link light and see network traffic. What can I do to get the
> kernel to see the cards?
Try the TG3 driver. The bcm5700 drivers from BroadCom are also supposed
to work, but you'll have to compile them yourself for Fedora.
Good Luck - Jon Carnes
More information about the TriLUG