[TriLUG] getting RH 7.1 to see new nics

[Douglas Kojetin]

You may have to edit the following files (if they exist, and if your 
setup is similar to my RH9 setup):

folder:  /etc/sysconfig/network-scripts/

files: ifcfg-eth0, ifcfg-eth1, etc

add or change

ONBOOT=yes

in order to get it to activate on boot

(hope that helps and I didn't type anything incorrectly)

Doug


On Apr 20, 2004, at 12:03 PM, Dan wrote:

> I have a Proliant ML370 server that has an on-board NIC... we needed 
> more interfaces so we have added 3 Netgear GA302T adapters to the 
> system but the kernel doesn't see the new cards... it still only sees 
> eth0 at boot.  The cards have a link light and see network traffic.  
> What can I do to get the kernel to see the cards?