[TriLUG] Fwd: IEEE Robotics/Automation - Flying unmanned aircraft in North Carolina

R Radford rradford at mindspring.com
Mon Aug 4 13:29:32 EDT 2014


Pizza/drink/social time is from 6-7pm and then we head to the meeting room,
with the speaker starting about 7:15.

If you can be in the room and set up by 7pm, that would be great.


On Mon, Aug 4, 2014 at 1:03 PM, Jeremy Davis <jeremyhwllc at gmail.com> wrote:

> Rodney, I will be pushing it to get there by 6 after work. What time will
> the speaker actually begin his preso?
>
> Jeremy Davis
> @jeremydavis0_0
> www.trianglecareerdevelopment.com
> www.linkedin.com/in/jeremydavisprofile
> On Aug 4, 2014 10:58 AM, "R Radford" <rradford at mindspring.com> wrote:
>
> > I think recording this talk would be great so I have sent a request to
> the
> > speaker to ask for his permission and I will post his response once I get
> > it.
> >
> > Jeremy, if you could bring your setup for recording tonight, that would
> be
> > great, just in case.
> >
> > Thanx,
> > Rodney
> >
> > On Mon, Aug 4, 2014 at 10:32 AM, Jeremy Davis <jeremyhwllc at gmail.com>
> > wrote:
> >
> > > I am strongly considering attending and recording (if allowed to
> record).
> > >
> > > Jeremy Davis
> > > @jeremydavis0_0
> > > www.trianglecareerdevelopment.com
> > > www.linkedin.com/in/jeremydavisprofile
> > > On Aug 4, 2014 10:17 AM, "Greg Brown" <gwbrown1 at gmail.com> wrote:
> > >
> > > > Any chance this will be recorded and uploaded somewhere?  I'd love to
> > > > attend but have class tonight 6 - 9 pm.
> > > >
> > > >
> > > > On Mon, Aug 4, 2014 at 10:11 AM, R Radford <rradford at mindspring.com>
> > > > wrote:
> > > >
> > > > > This is not really a Linux post, but it is at least as on-topic as
> > BBQ
> > > > and
> > > > > vi/emacs discussions, and thought that many in the list would find
> > the
> > > > > topic interesting.
> > > > >
> > > > > The meeting is tonight, so sorry for the short notice, but if the
> > idea
> > > of
> > > > > flying unmanned aircraft (think hobby quad and hex copters)
> intrigues
> > > > you,
> > > > > then this should be a good presentation on what you can legally do
> in
> > > NC.
> > > > >
> > > > > ---------- Forwarded message ----------
> > > > > From: Rodney Radford <ncgadgetry at gmail.com>
> > > > > Date: Sat, Aug 2, 2014 at 10:30 PM
> > > > > Subject: IEEE Robotics/Automation - Flying unmanned aircraft in
> North
> > > > > Carolina
> > > > >
> > > > > Have you:
> > > > >
> > > > >    * recently purchased a quadcopter, or considering it?
> > > > >    * seen the videos of quadcopters flying in fireworks and think
> > that
> > > > > can't be legal?
> > > > >    * considered using a quadcopter for taking real estate photos
> for
> > a
> > > > > little cash on the side?
> > > > >    * wondered about the legal regulations of flying it in North
> > > Carolina?
> > > > >
> > > > > Then come out to this month's IEEE Robotics and Automation meeting
> > > > (Monday
> > > > > night, August 4) for  an interactive discussion on who can fly and
> > what
> > > > can
> > > > > be flown in North Carolina as the law now exists.
> > > > >
> > > > >        https://meetings.vtools.ieee.org/m/27311
> > > > >
> > > > > We will look at the current and proposed law including North
> Carolina
> > > law
> > > > > and the to be proposed federal regulations. We will discuss when
> and
> > > > where
> > > > > will Certificates of Authorization might be required. Does it
> matter
> > > if I
> > > > > am flying for a hobby and fun or for commercial purposes? What
> > > > limitations
> > > > > might apply? Can I fly for agricultural purposes? Will I be
> required
> > to
> > > > > have education or training?
> > > > >
> > > > > We will discuss these questions along with many others. If you
> would
> > > like
> > > > > to submit questions ahead of time, please email me directly at
> > > > > jrvann at vannattorneys.com
> > > > >
> > > > > You can sign up for the meeting at the link below:
> > > > >
> > > > > https://meetings.vtools.ieee.org/m/27311
> > > > >
> > > > > While signing up is not a requirement, it does help us know how
> much
> > > food
> > > > > and drink to provide for the meeting, and let's us plan for the
> > correct
> > > > > size room.
> > > > >
> > > > > Thanx - hope to see you there!
> > > > > --
> > > > > This message was sent to: Greg Brown <gwbrown1 at gmail.com>
> > > > > To unsubscribe, send a blank message to trilug-leave at trilug.org
> from
> > > > that
> > > > > address.
> > > > > TriLUG mailing list :
> http://www.trilug.org/mailman/listinfo/trilug
> > > > > Unsubscribe or edit options on the web  :
> > > > > http://www.trilug.org/mailman/options/trilug/gwbrown1%40gmail.com
> > > > > Welcome to TriLUG: http://trilug.org/welcome
> > > > >
> > > > --
> > > > This message was sent to: Jeremy Davis <jeremydavis at jeremydavis.biz>
> > > > To unsubscribe, send a blank message to trilug-leave at trilug.org from
> > > that
> > > > address.
> > > > TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug
> > > > Unsubscribe or edit options on the web  :
> > > >
> > >
> >
> http://www.trilug.org/mailman/options/trilug/jeremydavis%40jeremydavis.biz
> > > > Welcome to TriLUG: http://trilug.org/welcome
> > > >
> > > --
> > > This message was sent to: Rodney Radford <rradford at mindspring.com>
> > > To unsubscribe, send a blank message to trilug-leave at trilug.org from
> > that
> > > address.
> > > TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug
> > > Unsubscribe or edit options on the web  :
> > > http://www.trilug.org/mailman/options/trilug/rradford%40mindspring.com
> > > Welcome to TriLUG: http://trilug.org/welcome
> > >
> > --
> > This message was sent to: Jeremy Davis <jeremydavis at jeremydavis.biz>
> > To unsubscribe, send a blank message to trilug-leave at trilug.org from
> that
> > address.
> > TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug
> > Unsubscribe or edit options on the web  :
> >
> http://www.trilug.org/mailman/options/trilug/jeremydavis%40jeremydavis.biz
> > Welcome to TriLUG: http://trilug.org/welcome
> >
> --
> This message was sent to: Rodney Radford <rradford at mindspring.com>
> To unsubscribe, send a blank message to trilug-leave at trilug.org from that
> address.
> TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug
> Unsubscribe or edit options on the web  :
> http://www.trilug.org/mailman/options/trilug/rradford%40mindspring.com
> Welcome to TriLUG: http://trilug.org/welcome
>


More information about the TriLUG mailing list