<br><font size=2 face="sans-serif">Are you sure you have this terminated on a layer 3 device.</font>
<br>
<br><font size=2 face="sans-serif">If you don't you will be having duplicate entries with the same mac address in your layer 2 switch.</font>
<br>
<br><font size=2 face="sans-serif">You have to be careful with sub interfaces (They can sneak up on you...I had one bite me once...But that's another story!)</font>
<br>
<br><font size=2 face="sans-serif">:-/)</font>
<br>
<br><font size=2 face="sans-serif">Shawn</font>
<br><font size=2 face="sans-serif"><br>
</font><font size=3 face="Times New Roman"><b>Shawn Taylor</b></font>
<br><font size=3 face="Times New Roman"><b>Systech Retail Systems</b></font>
<br><font size=3 face="Times New Roman"><b>Suite 200 - 5510 Six Forks rd.</b></font>
<br><font size=3 face="Times New Roman"><b>Raleigh, NC</b> <b>27609</b></font>
<br><font size=3 face="Times New Roman"><b>1-800-232-0820 ext 127</b></font>
<br><a href=mailto:staylor@srspos.com><font size=3 color=blue face="Times New Roman"><u>staylor@srspos.com</u></font></a>
<p><font size=3 face="Times New Roman"> </font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td>
<td><font size=1 face="sans-serif"><b>Chris Bullock <cgbullock@cox.net></b></font>
<br><font size=1 face="sans-serif">Sent by: trilug-admin@trilug.org</font>
<p><font size=1 face="sans-serif">04/28/2003 05:15 PM</font>
<br><font size=1 face="sans-serif">Please respond to trilug</font>
<br>
<td><font size=1 face="Arial"> </font>
<br><font size=1 face="sans-serif"> To: trilug@trilug.org</font>
<br><font size=1 face="sans-serif"> cc: </font>
<br><font size=1 face="sans-serif"> Subject: [TriLUG] RE: Routing errors</font></table>
<br>
<br>
<br><font size=2 face="Courier New">This is my output from the mii-tool<br>
/sbin/mii-tool <br>
eth0: negotiated 100baseTx-FD, link ok<br>
eth1: negotiated 100baseTx-FD, link ok<br>
eth2: no autonegotiation, 100baseTx-HD, link ok<br>
eth3: no autonegotiation, 100baseTx-HD, link ok<br>
<br>
Here are all interfaces, sorry about sending the least errorful interface earlier. As you can see, there are more errors than in the previous email.<br>
<br>
<br>
eth0 Link encap:Ethernet HWaddr MAC <br>
inet addr:IP Add Bcast:x.x.x.255 Mask:255.255.255.0<br>
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1<br>
RX packets:55978539 errors:3 dropped:459 overruns:0 frame:5<br>
TX packets:85587723 errors:3115160 dropped:0 overruns:0 carrier:6215962<br>
collisions:0 txqueuelen:100 <br>
RX bytes:1540110175 (1468.7 Mb) TX bytes:4027742426 (3841.1 Mb)<br>
Interrupt:11 Base address:0x3000 <br>
<br>
eth1 Link encap:Ethernet HWaddr MAC <br>
inet addr:IP Add Bcast:x.x.x.255 Mask:255.255.255.0<br>
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1<br>
RX packets:104100425 errors:0 dropped:483 overruns:0 frame:0<br>
TX packets:52230270 errors:4 dropped:0 overruns:0 carrier:8<br>
collisions:0 txqueuelen:100 <br>
RX bytes:1366089322 (1302.8 Mb) TX bytes:2841643608 (2710.0 Mb)<br>
Interrupt:11 Base address:0x2400 <br>
<br>
eth2 Link encap:Ethernet HWaddr 00:50:BF:98:73:96 <br>
inet addr:IP Add Bcast:x.x.x.255 Mask:255.255.255.0<br>
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1<br>
RX packets:56864611 errors:0 dropped:437 overruns:0 frame:0<br>
TX packets:52122824 errors:22960580 dropped:0 overruns:0 carrier:45907768<br>
collisions:0 txqueuelen:100 <br>
RX bytes:1778984664 (1696.5 Mb) TX bytes:2235070368 (2131.5 Mb)<br>
Interrupt:11 Base address:0x2800 <br>
<br>
eth3 Link encap:Ethernet HWaddr MAC <br>
inet addr:IP Add Bcast:x.x.x.255 Mask:255.255.255.0<br>
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1<br>
RX packets:31145536 errors:0 dropped:385 overruns:0 frame:0<br>
TX packets:1887616 errors:16975869 dropped:0 overruns:0 carrier:33942376<br>
collisions:0 txqueuelen:100 <br>
RX bytes:2332628747 (2224.5 Mb) TX bytes:846662933 (807.4 Mb)<br>
Interrupt:11 Base address:0x2c00<br>
--chris<br>
<br>
_______________________________________________<br>
TriLUG mailing list<br>
http://www.trilug.org/mailman/listinfo/trilug<br>
TriLUG Organizational FAQ:<br>
http://www.trilug.org/faq/TriLUG-faq.html<br>
</font>
<br>
<br>