simple VPN

[Jim Ray]

On the linksys, enable PPTP is the only thing you have to do.  There's
no VPN server/client.  Then, run your favorite VPN server, and you're
done.

Security doesn't really exist.  For every code, there is a decode.

> -----Original Message-----
> From: stan briggs [mailto:stan@stanbriggs.com]=20
> Sent: Wednesday, April 30, 2003 7:59 AM
> To: ncsa-discussion@ncsysadmin.org
> Subject: simple VPN
>=20
>=20
> greetings,
>=20
> i would like to build a vpn between two of my sites. want to=20
> be able to telnet, map drives, print, run X, RDC, etc. with=20
> some semblence of security. will have dsl (with fixed IP) at=20
> both sites. first site has linksys BEFSR11 (router with 1=20
> 10/100 port, no wireless). second site has nothing, yet.
>=20
> i thought that the linksys products had a vpn capability=20
> built into them. digging through the manuals has not, yet,=20
> shown that to be true.
>=20
> has anyone had any success with some simple VPNs like this?
>=20
> later,
> stan
>=20
>=20
> _______________________________________________
> ncsa-discussion mailing list
> ncsa-discussion@ncsysadmin.org=20
> http://www.ncsysadmin.org/mailman/listinfo/ncs> a-discussion
>=20
>=20